Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Riderz Planet Viaterra Grid Fluorescent Green Leather Gloves Bringing you the best of both worlds: race-spec protection and daily use comfort. The Grid comes equipped with the same premium, top-of-the-line KNOX SPS 305 protection used in the world’s most advanced gloves. Combine that with high-density TPU protectors for knuckles and wrists, you have the best protection available for the Indian rider. Things to remember Putting on and taking off may be slightly difficult because the wrist area is narrowed down for safety reasons. This is done to prevent the gloves from coming off your hands during a crash and to offer a snug fit. If you have never used gloves with a pinky bridge you may find it odd or uncomfortable. Give it a few days of riding and you will get used to it. Remember, any protective gear is relatively uncomfortable to wear compared to riding without any protection. You may find the Knox SPS on the palm to be uncomfortable on the first try. But just like any protective gear, over a period of time, you will get used to it so you do not even notice it. These devices are incorporated into the gloves to ensure you are well-protected when you most need them. In our research, we found that the palm size and the finger length are not in the same proportion for everyone (that makes each of us unique in the truest sense!). In such cases, the primary area of fitment should always be the palm area, even if you are to be left with some extra room near your fingertips. We have used high-density TPU to maximise protection and longevity. While we have added an additional foam layer underneath the TPU, they may feel a bit too hard at the beginning. Thinner and more flexible knuckle protectors are not very effective during a crash and do not last long either. Care instructions Our gloves use full-grain goat leather that is naturally water-resistant. This means that the gloves do not get ruined if they get wet in rain. However, when leather gets wet, the oils get stripped from the leather – this will stiffen the leather and eventually cause it to crack. Think of it as your skin after taking a bath – you need to moisturize to replace the natural oils in your skin removed by the water. So, what matters for your gloves is what you do after it gets wet. Here is a step-by-step process to keep your glove well cared for and last longer. If your gloves get wet, dry the gloves by pressing them softly with an absorbent towel. If there are stains, clean the gloves by hand with a pH-neutral leather cleaner using a damp cloth or a soft-bristled brush. DO NOT USE HOT WATER DO NOT allow your gloves to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. Do not use a washing machine or high-pressure devices to clean the gloves, as high temperatures and pressure will damage the leather. Do not place your gloves near, or let your gloves get into contact with a direct heat source – this will harden the leather and lead to damage. Also, dry the gloves indoors away from direct sunlight where there is good ventilation. Just before the gloves are completely dry, put the gloves on and shape them to your hand while still damp. Remove the gloves gently, trying to retain this shape in the gloves, and allow them to continue drying. After the gloves are completely dry, apply a good quality leather conditioner. This is very important. Properly treated and conditioned (oiled) leather will breathe and the internal microfibers will move freely in the leather. Use a good quality leather conditioner that will allow the leather to breathe. Apply conditioner generously and rub it into the leather. Allow the conditioner to soak into the gloves and reapply (you can do this in the sun). Wipe off any excess conditioner and make sure the gloves are not slick on the motorcycle controls. Make sure that your gloves are completely dry before you store them. When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow on the leather causing discoloration and damage.  

Viaterra Grid Fluorescent Green Leather Gloves

Add Your Review
Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves
Viaterra Grid Fluorescent Green Leather Gloves
Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves Viaterra Grid Fluorescent Green Leather Gloves
Rs. 5,999.00 Rs. 5,400.00
In Stock

  • Free Shipping*

  • 100% Genuine Product

  • Warranty Assistance*

Viaterra Grid Fluorescent Green Leather Gloves

Bringing you the best of both worlds: race-spec protection and daily use comfort. The Grid comes equipped with the same premium, top-of-the-line KNOX SPS 305 protection used in the world’s most advanced gloves. Combine that with high-density TPU protectors for knuckles and wrists, you have the best protection available for the Indian rider.

Things to remember

  • Putting on and taking off may be slightly difficult because the wrist area is narrowed down for safety reasons. This is done to prevent the gloves from coming off your hands during a crash and to offer a snug fit.
  • If you have never used gloves with a pinky bridge you may find it odd or uncomfortable. Give it a few days of riding and you will get used to it. Remember, any protective gear is relatively uncomfortable to wear compared to riding without any protection.
  • You may find the Knox SPS on the palm to be uncomfortable on the first try. But just like any protective gear, over a period of time, you will get used to it so you do not even notice it. These devices are incorporated into the gloves to ensure you are well-protected when you most need them.
  • In our research, we found that the palm size and the finger length are not in the same proportion for everyone (that makes each of us unique in the truest sense!). In such cases, the primary area of fitment should always be the palm area, even if you are to be left with some extra room near your fingertips.
  • We have used high-density TPU to maximise protection and longevity. While we have added an additional foam layer underneath the TPU, they may feel a bit too hard at the beginning. Thinner and more flexible knuckle protectors are not very effective during a crash and do not last long either.

Care instructions

Our gloves use full-grain goat leather that is naturally water-resistant. This means that the gloves do not get ruined if they get wet in rain. However, when leather gets wet, the oils get stripped from the leather – this will stiffen the leather and eventually cause it to crack. Think of it as your skin after taking a bath – you need to moisturize to replace the natural oils in your skin removed by the water. So, what matters for your gloves is what you do after it gets wet.

Here is a step-by-step process to keep your glove well cared for and last longer.

  • If your gloves get wet, dry the gloves by pressing them softly with an absorbent towel.
  • If there are stains, clean the gloves by hand with a pH-neutral leather cleaner using a damp cloth or a soft-bristled brush. DO NOT USE HOT WATER
  • DO NOT allow your gloves to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
  • Do not use a washing machine or high-pressure devices to clean the gloves, as high temperatures and pressure will damage the leather.
  • Do not place your gloves near, or let your gloves get into contact with a direct heat source – this will harden the leather and lead to damage. Also, dry the gloves indoors away from direct sunlight where there is good ventilation.
  • Just before the gloves are completely dry, put the gloves on and shape them to your hand while still damp. Remove the gloves gently, trying to retain this shape in the gloves, and allow them to continue drying.
  • After the gloves are completely dry, apply a good quality leather conditioner. This is very important. Properly treated and conditioned (oiled) leather will breathe and the internal microfibers will move freely in the leather. Use a good quality leather conditioner that will allow the leather to breathe. Apply conditioner generously and rub it into the leather. Allow the conditioner to soak into the gloves and reapply (you can do this in the sun). Wipe off any excess conditioner and make sure the gloves are not slick on the motorcycle controls.
  • Make sure that your gloves are completely dry before you store them. When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow on the leather causing discoloration and damage.

 


Viaterra Grid Fluorescent Green Leather Gloves

Bringing you the best of both worlds: race-spec protection and daily use comfort. The Grid comes equipped with the same premium, top-of-the-line KNOX SPS 305 protection used in the world’s most advanced gloves. Combine that with high-density TPU protectors for knuckles and wrists, you have the best protection available for the Indian rider.

Things to remember

  • Putting on and taking off may be slightly difficult because the wrist area is narrowed down for safety reasons. This is done to prevent the gloves from coming off your hands during a crash and to offer a snug fit.
  • If you have never used gloves with a pinky bridge you may find it odd or uncomfortable. Give it a few days of riding and you will get used to it. Remember, any protective gear is relatively uncomfortable to wear compared to riding without any protection.
  • You may find the Knox SPS on the palm to be uncomfortable on the first try. But just like any protective gear, over a period of time, you will get used to it so you do not even notice it. These devices are incorporated into the gloves to ensure you are well-protected when you most need them.
  • In our research, we found that the palm size and the finger length are not in the same proportion for everyone (that makes each of us unique in the truest sense!). In such cases, the primary area of fitment should always be the palm area, even if you are to be left with some extra room near your fingertips.
  • We have used high-density TPU to maximise protection and longevity. While we have added an additional foam layer underneath the TPU, they may feel a bit too hard at the beginning. Thinner and more flexible knuckle protectors are not very effective during a crash and do not last long either.

Care instructions

Our gloves use full-grain goat leather that is naturally water-resistant. This means that the gloves do not get ruined if they get wet in rain. However, when leather gets wet, the oils get stripped from the leather – this will stiffen the leather and eventually cause it to crack. Think of it as your skin after taking a bath – you need to moisturize to replace the natural oils in your skin removed by the water. So, what matters for your gloves is what you do after it gets wet.

Here is a step-by-step process to keep your glove well cared for and last longer.

  • If your gloves get wet, dry the gloves by pressing them softly with an absorbent towel.
  • If there are stains, clean the gloves by hand with a pH-neutral leather cleaner using a damp cloth or a soft-bristled brush. DO NOT USE HOT WATER
  • DO NOT allow your gloves to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
  • Do not use a washing machine or high-pressure devices to clean the gloves, as high temperatures and pressure will damage the leather.
  • Do not place your gloves near, or let your gloves get into contact with a direct heat source – this will harden the leather and lead to damage. Also, dry the gloves indoors away from direct sunlight where there is good ventilation.
  • Just before the gloves are completely dry, put the gloves on and shape them to your hand while still damp. Remove the gloves gently, trying to retain this shape in the gloves, and allow them to continue drying.
  • After the gloves are completely dry, apply a good quality leather conditioner. This is very important. Properly treated and conditioned (oiled) leather will breathe and the internal microfibers will move freely in the leather. Use a good quality leather conditioner that will allow the leather to breathe. Apply conditioner generously and rub it into the leather. Allow the conditioner to soak into the gloves and reapply (you can do this in the sun). Wipe off any excess conditioner and make sure the gloves are not slick on the motorcycle controls.
  • Make sure that your gloves are completely dry before you store them. When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow on the leather causing discoloration and damage.

 


Excellent, Now You can get it better...

Get 10% discount when you share on Social Platforms

Thank You, Your discount code: